Integra DPT-1 Instruction Manual

Integra dpt-1: instruction manual

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

Download this manual

Enlarged version

DVD Changer

DPT-1

Instruction Manual

Play Mode

Random

Display

Input

Text

Standby

Single Loader

Standby/On

Access

Play

Thank you for purchasing the Integra DVD

Changer.

Please read this manual thoroughly before making

connections and turning on the power.

Following the instructions in this manual will enable

you to obtain optimum performance and listening

enjoyment from your new DVD Changer.

Please retain this manual for future reference.

DISC / CHARACTER

( Push To Enter )

Direct Custom

Audio / Video

Update

Clear

Open /Close

Stop

Play

Pause

Direct Digital Path

Keyboard / Mouse

Before Using

Names and Functions

Making Connections

Setting Up the Changer

Getting Started Using Your DVD Changer 23

Disc Management

Adjusting Audio and Video Settings 39

Setting the Language Options

Advanced Functions

DPT-1

Additional Information

Table of Contents

Need help?

Do you have a question about the DPT-1 and is the answer not in the manual?

Questions and answers

Summary of Contents for Integra DPT-1

Page 1 Single Loader Standby/On Access Play Direct Digital Path Thank you for purchasing the Integra DVD Changer. Please read this manual thoroughly before making connections and turning on the power. Following the instructions in this manual will enable you to obtain optimum performance and listening enjoyment from your new DVD Changer.
Page 2: Important Safety Instructions
Please read through these operating instructions so you will know how to operate your model properly. After you have finished reading the instructions, put them away in a safe place for future reference. • This changer is not suitable for commercial use. WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR...
Page 3 CONGRATULATIONS ON YOUR PURCHASE OF THIS FINE Integra PRODUCT. Integra is on the leading edge of DVD research for consumer products and this unit incorporates the latest technological developments. We are sure you will be fully satisfied with the DVD changer.
Page 4 Video CD, CD, and CD-R formats DVDs, Video CDs, CDs, and CD-Rs that display the logos shown below can be played back on Integra DVD players. For more information on discs compatible with this changer, refer to the table below.
Page 5 * PS/2 is a registered trademark of IBM corporation. Connection to another disc changer for increased capacity This unit can be connected to another DPT-1 unit for combined control of up to 601 discs (page 66). DISC / CHARACTER Direct Custom...
Page 6: Differences In Disc Composition
Differences in Disc Composition DVDs are divided into units referred to as titles, and titles are divided into chapters. A DVD which contains a movie may have only one title with many or no chapter divisions. Karaoke DVDs may have many titles, assigning a title to each song on the DVD.
Page 7: Table Of Contents
Table of Contents Before Using ... 8 Checking Accessories ... 8 Preparing the Remote Controller ... 8 Names and Functions ... 9 Front Panel ... 9 Display Window ... 10 Remote Controller ... 12 Rear Panel ... 14 Making Connections ... 15 Connecting Your DVD Changer ...
Page 8: Before Using
• Exposing the remote sensor to direct sunlight or strong light may cause faulty operation. • When Master-Slave connections are made to another DPT-1 to create a 601-disc changer, only the remote sensor on the first DPT-1 will accept signals from the remote controller...
Page 9: Names And Functions
(pages 27 and 33). Disc/ Character ( Push To Enter ) Direct Custom Audio / Video Update Clear Open /Close Stop Play Pause Keyboard / Mouse DPT-1...
Page 10: Display Window
¡ ¢ (forward) button Press to advance to chapters/tracks. Press and hold to perform fast-forward scanning. When using the front panel to edit input text, use to move the position of the cursor (pages 27 and 33). Clear button Use to cancel repeat and random playback, edit programs, and clear text entries (pages 33, 55, 56, 58, and 62).
Page 11 TRK and CHP indicators Indicates a chapter or track number is being displayed. REMAIN and TOTAL indicators REMAIN indicates the remaining playback time of a title or chapter/track is being displayed. TOTAL indicates the disc in the changer is stopped and DISPLAY has been pressed (page 65).
Page 12: Remote Controller
Remote Controller All of the command buttons on the remote controller glow in the dark for easy control of the changer even in the dark. Hold the unit under a light for optimal results. POWER DISPLAY AUDIO SUBTITLE ANGLE SETUP STUP MENU MULTI DIAL...
Page 13 SUB SETUP button* Press to open and close the changer’s Sub Setup screen (pages 30, 31, 32, 35 and 36). LAST MEMORY button Press LAST MEMORY during playback to set a Last Memory point (page 61). HI-LITE button Press to perform a highlight scan of all of the discs included in the current play mode (page 60).
Page 14: Rear Panel
S-video cable. When using this jack, be sure to set VIDEO SELECT to the top position (pages 16 and 18). S-VIDEO IN jack Connect the S-VIDEO IN jack to another DPT-1 changer or component with S-video output capability (pages 67). VIDEO SELECT switch Use to set which output is used to output the video signals.
Page 15: Making Connections
Connecting two DPT-1 changers? If you have chosen to purchase two DPT-1 changers for combined control of up to 601 discs, make connections to the changer to be used as the Master changer following the procedures in this section.
Page 16: Home Theater Component Connections
* It may be possible to make video connections through your AV receiver or amplifier. Please refer to the manual supplied with your component for more information. MASTER-SLAVE CONTROL VIDEO EQUIPMENT VIDEO SELECT 9C39 E160927 DIGITAL ( OPTICAL ) DVD CHANGER DPT-1 MODEL NO. DIGITAL ( COAXIAL ) Coaxial cable (Not included) REGIONAL CODE TV or monitor with S-video inputs INTERFACE CONNECTOR...
Page 17: Audio Connections
AV component. VIDEO MASTER S VIDEO MASTER-SLAVE CONTROL SLAVE VIDEO SELECT DIGITAL (OPTICAL) DVD CHANGER DPT-1 MODEL NO. DIGITAL (COAXIAL) COMPONENT VIDEO OUT AUDIO REGIONAL CODE DIGITAL ( OPTICAL ) DIGITAL ( COAXIAL )
Page 18: Video Connections
Video Connections This changer features S-video, composite, and component video output possibilities. Check the manual supplied with your TV or monitor to determine the best possible connection for your system. In addition to making physical connections to your TV or monitor, it is also necessary to assign the TV screen size.
Page 20: Setting Up The Changer
Open /Close Stop Play Pause To return to the Setup screen Keyboard / Mouse DPT-1 Press RETURN the Setup screen General menu screen appears. Please note that no settings are changed if RETURN pressed before the Setup Navigator is finished. Audio1...
Page 21: Setting The Osd Language
Setting the OSD Language (On-Screen Display Language) The [OSD Language] screen establishes the OSD language, or on-screen display language, which refers to the language that is used by the changer in menus and on-screen messages. Additionally, the language that is established at this setting will also be set as the audio and subtitle language.
Page 22 Setting compatibility with 96 kHz output The [96 kHz PCM Audio] screen establishes whether or not the AV component the changer is connected to is capable of processing an audio signal with a sampling rate of 96 kHz. This screen only appears if connections have been made to an external AV component as determined in the previous screen.
Page 23: Getting Started Using Your Dvd Changer
Clear revolution while the changer determines where Open /Close Stop Play Pause discs have been loaded in the rack. Keyboard / Mouse DPT-1 Play Mode Random Standb y Stand by/On DISC / CHARACTER ( Push To Enter ) Note Never force the hood open or closed. Doing so may cause part damage or changer malfunction.
Page 24: Playing Dvds, Video Cds And Cds
The section ‘When a menu screen is displayed’ on the following page provides general guidelines for understanding menu screens. DISC / CHARACTER ( Push To Enter ) Direct Custom Audio / Video Update Clear Open /Close Stop Play Pause Keyboard / Mouse DPT-1...
Page 25: When A Menu Screen Is Displayed
Notes • Noise is output if you make digital audio connections to a receiver or amplifier that does not have a built-in decoder. Check that the digital audio output format selected in the Audio 1 menu corresponds to the audio components you have made connections to (page 41).
Page 26: Selecting A Play Mode
Open /Close Stop Play Pause Keyboard / Mouse DPT-1 Press PLAY MODE repeatedly to select one of the play modes: SINGLE : One disc is played. Playback stops after the CUSTOM : Only discs in the custom file are played back.
Page 27: Chapter (Track) Skip Forward/Skip Back
4 and Stop Play Pause releasing when the desired track number appears in Keyboard / Mouse DPT-1 the display window. ¡ ¢ Fast forward scanning Press and hold ¡ (¡ ¢ on the front panel) during playback.
Page 28: Playing A Disc That Is Not Loaded In The Rack (Single Loader Play)
Pause Notes Keyboard / Mouse DPT-1 • The disc in the single loader slot can also be selected with the • By pressing SELECT DISC NUMBER on the remote controller • If a disc is loaded in the single loader slot, pressing Single •...
Page 29: Stopping Playback And Switching Power Off
Play Pause Note Keyboard / Mouse DPT-1 If you want to continue viewing a DVD at a later time or date, it is recommended to use the Last Memory function described on page 61. About the Last Disc Memory function Even after you have turned the changer’s power off, the...
Page 30: Disc Management
Disc Management This changer makes it easy to manage all the discs in the changer. The Sub Setup screen contains three menu screens that allow you to organize your disc library as you see fit. This section outlines the basic operation of the Sub Setup screen menus.
Page 31: Keeping The Disc Order And Information Updated
To performing Add. Update using controls on the front panel Press UPDATE on the front panel repeatedly until “Add. Update” appears in the display window, then press the enter button. To proceed to the next disc without inputting text information for the current disc During Add.
Page 32 When a disc already contain text information When text is already present on the disc in the form of CD TEXT or DVD text, the title and artist information appears automatically in the appropriate spaces. However, it is possible to change the information that appears for these discs.
Page 33 Please note that when the custom play mode is selected and Keyboard / Mouse DPT-1 Text Input is pressed, text input is applied to the name of the custom file and not to the title or artist’s name of the currently Clear selected disc.
Page 34 • Certain commercially available PS/2 mouse models, PS/2 keyboard models, and “Y” cables may not be compatible with this unit. For details, please consult Integra technical support. * IBM and PS/2 are registered trademarks of IBM Corporation. Inputting characters using a PS/2*...
Page 35: Selecting A Disc On-Screen
Selecting a Disc On-Screen POWER OPEN/ CLOSE DISPLAY AUDIO SUBTITLE ANGLE SETUP TOP MENU STUP MENU T.MNU MULTI DIAL ENTER (Cursor) FUNCTION SELECT MEMORY DISC No. JOG MODE F.MEM DISC STOP PLAY PAUSE RETURN STEP / SLOW SEARCH MODE CLEAR RANDOM REPEAT PROGRAM LAST...
Page 36 To perform a direct title or chapter/track search using the number buttons Press the number buttons while the disc is stopped to select a title number. Press the number buttons while the disc is playing to select a chapter or track. •...
Page 37: Creating And Selecting Custom Files
Input the appropriate search item for each type of search as follows. • For a disc number search, move the cursor control joystick down to the nearest number to the disc you want to access. Text Custom Auto Update Disc Type Title Artist...
Page 38 Move the cursor control joystick down to select one of the custom files. • Use 4 and ¢ to select a different set of custom files. • To input a name for the custom file, refer to the section ‘To input a name for the custom file’ on this page.
Page 39: Adjusting Audio And Video Settings
Pause grayed out on the screen and cannot be adjusted. To change these settings, press STOP 7 first Keyboard / Mouse DPT-1 before pressing SETUP. • Operating the menu after pressing STOP 7 may cancel the resume function. • Some menu options are not immediately effective if set while a disc is playing.
Page 40: Changing To The Setup Screen "Expert" Menu Mode
POWER DISPLAY AUDIO SETUP STUP MENU MULTI DIAL ENTER (Cursor) FUNCTION MEMORY F.MEM STOP PLAY RETURN STEP / SLOW Move the cursor control joystick up or down to select a new setting and press ENTER to set the new setting in memory. Press RETURN or move the cursor control joystick left to exit the options without making...
Page 41: Setting The Digital Audio Output To Be Compatible With Your Av Component
Setting the Digital Audio Output To Be Compatible with Your AV Component – DVD This changer is capable of digital audio output for Dolby Digital, DTS, MPEG, and signals with a sampling rate of 96 kHz. Make settings in the Setup screen Audio 1 menu to reflect the capabilities of the components that you have made digital connections to.
Page 42: Turning The Digital Output On And Off
Turning the Digital Output On and Off Expert Depending on your preferences and the type of connections made, you may opt not to have the digital audio signal output at all. When this setting is set to “Off” there is no signal output from the digital audio output jacks.
Page 43: Setting The Tv Screen Size
Setting the TV Screen Size The width-to-height ratio of conventional TVs is 4:3, while the width-to-height ratio of wide screen and high-definition TVs is 16:9. This width-to-height ratio is called the aspect ratio. When viewing software recorded in different aspect ratios, the image’s height to width ratio can be switched to match the TV or monitor being used.
Page 44: Setting The Language Options
Setting the Language Options DVDs have the capacity to contain a great deal of audio information, which includes the ability to hold up to 8 different language tracks and subtitle information in as many as 32 different languages. This section outlines the variety of audio language and subtitle options available with this changer.
Page 45: Changing The Audio Language (Multi-Language Function)
Changing the Audio Language (Multi-Language Function) Dolby Digital, PCM, and other audio data can be recorded on DVDs in a number of languages or audio tracks, letting you choose the desired language or audio. Dolby Digital 5.1CH Audio English Audio POWER OPEN/ CLOSE...
Page 46: Setting Language And Subtitle Preferences In The Setup Screen Menus
Setting Language and Subtitle Preferences in the Setup Screen Menus The Setup screen Language menu contains a number of settings related to the audio and subtitle language preferences. Please note that changes to the settings in the Language menu in this section cannot be made when a disc is playing.
Page 47 When “Other” is selected When you want to select one of the 136 languages as the main audio language, follow the steps below when the following screen appears. A language code list can be found on page 73. Audio1 Video Language General OSD Language –...
Page 48 Setting Auto Language to control subtitle and audio language based on program content When the Auto Language function is used, foreign movies are shown with the original audio soundtrack and subtitles in the language selected in the [Subtitle Language] menu option. Domestic films are shown with the original audio soundtrack and no subtitles.
Page 49: Advanced Functions
Advanced Functions This changer is compatible with DVD, Video CD, and CD disc formats. Users already familiar with Video CD or CD will already be familiar with some of the functions the changer is capable of performing. With DVD, an even greater number of possibilities and functions are available.
Page 50: Adjusting The Video Quality (Digital Noise Reduction)
Adjusting the Video Quality (Digital Noise Reduction) – DVD/Video CD You can either select a preprogrammed setting designed to match certain program types or make adjustments to match your own preferences and save them in the changer’s memory. Selecting a preprogrammed setting POWER OPEN/ CLOSE...
Page 51 Adjusting the picture quality settings POWER OPEN/ CLOSE DISPLAY AUDIO SUBTITLE ANGLE DISPLAY SETUP TOP MENU STUP MENU T.MNU MULTI DIAL 2,4,5,6 ENTER (Cursor) FUNCTION SELECT MEMORY DISC No. JOG MODE F.MEM DISC STOP PLAY PAUSE RETURN STEP / SLOW SEARCH MODE CLEAR Press DNR.
Page 52: Still Frame/Slow Play/Frame Advance Playback
Still Frame/Slow Play/Frame Advance Playback The video images on DVD and Video CD can be viewed as a still frame, played back at slow speeds and even advanced frame by frame. FUNCTION SELECT MEMORY DISC No. JOG MODE F.MEM DISC PLAY 3 STOP PLAY...
Page 53: Scanning In Forward And Reverse Directions At Different Speeds
Scanning in Forward and Reverse Directions at Different Speeds – DVD/Video CD This changer incorporates technology that enables smooth playback of DVDs and Video CDs not only at different speeds but also in both forward and reverse directions. Video CDs cannot be played slowly in the reverse direction.
Page 54: Viewing From A Desired Camera Angle (Multi-Angle)
Viewing from a Desired Camera Angle (Multi-Angle) – DVD You can select a camera angle when viewing DVDs with the multi-angle option. ANGLE : 1/4 » ANGLE : 4/4 POWER DISPLAY AUDIO SUBTITLE ANGLE SETUP STUP MENU MULTI DIAL ENTER FUNCTION SELECT MEMORY...
Page 55: Repeat Play
Repeat Play – DVD/Video CD/CD You can repeat an entire title, chapter or track, or just a part. FUNCTION SELECT MEMORY DISC No. JOG MODE F.MEM DISC STOP 7 STOP PLAY PAUSE RETURN STEP / SLOW SEARCH MODE CLEAR REPEAT RANDOM REPEAT PROGRAM LAST...
Page 56: Random Play
Random Play – DVD/Video CD/CD Play titles, chapters, tracks, or discs in random order depending on the play mode.. POWER OPEN/ CLOSE DISPLAY AUDIO SUBTITLE ANGLE SETUP STUP MENU MULTI DIAL ENTER FUNCTION SELECT MEMORY DISC No. JOG MODE F.MEM DISC STOP 7 STOP...
Page 57: Playback In A Desired Order (Program Play)
Playback in a Desired Order (Program Play) – DVD/Video CD/CD The titles and chapters on a DVD and similarly the tracks on a Video CD or CD can be arranged to play in the order you want. You can create a program mixing titles, chapters, and tracks on all of the discs loaded in the disc tray.
Page 58 To confirm the contents of a program 1 Press PROGRAM. 2 Use 4 or ¢ buttons to jump to the next/previous page of six steps (4/¢ on the front panel cannot be used to perform this operation). 3 Press PROGRAM to exit the program screen. To change the contents of a program 1 Press PROGRAM.
Page 59: To Make An Ongoing Program Of Your Favorite Titles, Chapters And Tracks (Best Play)
To make an ongoing program of your favorite titles, chapters and tracks (Best play) – DVD/Video CD/CD With this changer, it is possible to make an ongoing program of up to 50 of your favorite chapters or tracks while watching DVDs or Video CDs or while listening to CDs.
Page 60: Reviewing Previously Played Discs (Previous Scan)
Reviewing Previously Played Discs (Previous Scan) – DVD/Video CD/CD This function plays a brief segment from up to 20 previously played discs in reverse chronological order from the most recently played disc. STOP 7 STOP PLAY RETURN STEP / SLOW SEARCH MODE RANDOM REPEAT LAST...
Page 61: Continuing Playback From A Specified Location (Last Memory)
Continuing Playback from a Specified Location (Last Memory) – DVD The Last Memory function is convenient when you want to continue viewing a disc from the point where you were watching before. Unlike the resume function, the Last Memory function is effective even if the DVD is removed from the changer.
Page 62: Memorizing Settings For Often Viewed Dvds (Condition Memory)
Memorizing Settings for Often Viewed DVDs (Condition Memory) – DVD You can store in memory settings for DVDs you often watch. Settings remain in memory even if you remove the disc from the changer, or switch power to the changer to standby. If you play a disc that has its settings memorized, “COND _ MEMO”...
Page 63: Memorizing Regularly Used Menu Settings (Function Memory)
Memorizing Regularly Used Menu Settings (Function Memory) – DVD/Video CD/CD You can create a shortcut menu that contains settings that you frequently change and call up this menu whenever you need to change one of the stored settings. Settings remain in memory even if the changer is turned off.
Page 64: Viewing Disc Information
Viewing Disc Information – DVD/Video CD/CD Use DISPLAY to get current information about the disc currently playing. You can get information about the titles and chapters on a DVD or tracks on a Video CD or CD. When viewing DVDs, you can also check the digital bitstream transmission rate.
Page 65 Video CD (with PBC turned off) Title and artist information: 5/10 20.19 Play Dance Coll. / Various Top Row: disc number, title and chapter number, elapsed time of current title Bottom Row: disc title and artist name (When text is programmed on the disc, track text, and/or the disc title/artist name is displayed.)
Page 66: Connecting To Another Changer For Control Of 601 Discs
Connecting to Another Changer for Control of 601 Discs When you have two Integra DPT-1 changers or decide to add a second Integra DPT-1 changer to accomodate a growing disc collection, it is possible to make Master-Slave connections to use both changers as a single unit for total control of up to 601 discs.
Page 67 VIDEO OUT VIDEO VIDEO SELECT COMPONENT VIDEO OUT Slave DPT-1 changer S-video connections When S-video connection is made to a TV or monitor, use a commercially available S-video cable to make S-video connections from the S-VIDEO OUT jack on the Slave changer to the S-VIDEO IN jack on the Master changer.
Page 68: Utilizing The Audio-Video Output Of Another Av Component
“Expert” menu mode (pages 40 and this page). • When Master-Slave connections are made to a second Integra DPT-1 changer, it is not possible to make connections to a separate component even if some jacks are not being used by the Slave changer.
Page 69: Setting The Parental Lock Level
Setting the Parental Lock Level This changer lets you set the Parental Lock if the DVD has a parental lock level recorded on it. With Parental Lock capable discs, you can block access to material you feel is inappropriate for your children. Refer to the DVD disc jacket and the accompanying documentation to see if a particular disc contains a parental lock level.
Page 70: Turning The Screen Saver On And Off
Changing the password Change your password whenever you feel it is necessary. However, if you forget your existing password, you cannot enter this screen to change it. Audio1 Video Language General Setup Menu Mode – Basic Setup Navigator Parental Lock Level Change Password Change Setup viewing restrictions...
Page 71: Additional Information
The changer's pickup lens should not become dirty in normal use, but if for some reason it should malfunction due to soiling, contact your nearest Integra authorized service center. Lens cleaners are commercially available, however their use is not recommended because some may cause damage to the lens.
Page 72: For Proper And Long Use Of This Unit
A damaged power cord can cause a fire or give you an electrical shock. Check the power cord once in a while. When you find it damaged, ask your nearest Integra authorized service center or your dealer for a replacement.
Page 73: Language Code List
Language Code List Language codes are used when setting the audio and subtitle language preferences (page 47). Language Input-code 1001 Japanese (ja) 0514 English (en) 0618 French (fr) 0405 German (de) 0920 Italian (it) 0519 Spanish (es) 1412 Dutch (nl) 1821 Russian (ru) 2608...
Page 74: Troubleshooting
Inspect the other components and electrical appliances being used. If the trouble cannot be rectified even after exercising the checks listed below, ask your nearest Integra authorized service center or your dealer to carry out repair work. The hood opens automatically.
Page 75: Resetting The Changer To System Settings
DVDs and CDs use different recording methods. \ This is not a malfunction. There is no video and/or audio output from a SLAVE DPT-1 or other component connected to the input jacks on this unit. Connections are incorrect. \ Check that connections are made firmly from the output jacks on the other component to the IN jacks on this unit (pages 66 and 67).
Page 76: Terms
Terms Aspect ratio Aspect ratio refers to the length to height ratio of TV screens. The ratio of a standard TV is 4:3, while the ratio of a high-definition or wide TV is 16:9. The latter allows you to enjoy a picture with a wider perspective. CD TEXT CD TEXT is a system in which text information is stored on a CD.
Page 77 Regional restriction codes (region number) Regional restriction codes are built in to DVD players and DVD discs for each sales region. If the regional code of the DVD player does not match one of the regional codes of the DVD disc, playback is not possible.
Page 78: Specifications
Specifications General System ... File-type DVD system and Compact Power requirements ... AC 120 V, 60 Hz Power consumption ... 21 W Power consumption in standby mode ... less than 0.9 W Weight ... 7.8 kg (17.21 bs.) Dimensions ... 435 (W) x 441 (D) x 193 (H) mm (Not including protruding cables, etc.) Operating temperature ...
Page 79 E S T 1 9 2 4 Selecting fine audio equipment such as the unit you’ve just purchased is only the start of your musical enjoyment. Now it’s time to consider how you can maximize the fun and excitement your equipment offers. This manufacturer and the Electronic Industries Association’s Consumer Electronics Group want you to get the most out of your equipment by playing it at a safe level.
Page 80 Integra Division of ONKYO U.S.A. CORPORATION 200 Williams Drive, Ramesy, N.J. 07446, U.S.A. Tel: 201-825-7950 Fax: 201-825-8150 E-mail: integra@onkyousa.com Integra Division of ONKYO CORPORATION Sales & Product Planning Div. : 2-1, Nisshin-cho, Neyagawa-shi, OSAKA 572-8540, JAPAN HOMEPAGE Tel: 072-831-8111 Fax: 072-833-5222 http://www.onkyo.co.jp/...

Integra DPT-1 Instruction Manual

Before Using

Names and Functions

Making Connections

Setting up the Changer

Getting Started Using Your DVD Changer

Disc Management

Adjusting Audio and Video Settings

Setting the Language Options

Advanced Functions

Additional Information

Quick Links

Need help?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Integra DPT-1

Summary of Contents for Integra DPT-1

Table of Contents