Cd Changer Mode; Switching To Cd Changer Mode; Selecting Cds; Selecting Tracks - Blaupunkt Lexington C32 Operating Instructions Manual

CD CHANGER MODE

CD changer mode
You can connect a CD changer to the
Lexington C32 unit. You can obtain fur-
ther information on available CD chang-
ers from your dealer.
Note:
Information on handling CDs,
inserting CDs and operating the
CD changer can be found in the
operating instructions supplied with
your CD changer.

Switching to CD changer mode

Keep pressing the SOURCE 9
button until the display shows, for
instance, "CDC 1--1".
The first digit in this display represents
the CD number (in this case 1), and the
second digit represents the track num-
ber (in this case 1).
Playback begins with the first CD that
the CD changer detects.

Selecting CDs

To move up or down to another CD,
press the or
several times.

Selecting tracks

To move up or down to another track on
the current CD,
press the or
several times.
12
button 8 once or
button 8 once or

Fast searching (audible)

To fast search backwards or forwards,
keep one of the
pressed until fast searching
backwards / forwards begins.
Repeating individual tracks or
whole CDs (REPEAT)
To repeat the current track,
briefly press button 3 (RPT) <.
"S--RPT" appears briefly in the display.
To repeat the current CD,
keep the 3 (RPT) button <
pressed for longer than two
seconds.
"D--RPT" appears briefly in the display.
Deactivating REPEAT
To stop the current track or current CD
from being repeated,
press button 3 (RPT) < until
"S--RPT" or "D--RPT" disappears
and the standard CD changer
display reappears.
buttons 8