Table of Contents
Advertisement
70
Getting Started
Connecting external display devices
Connecting external display devices
Your computer comes with a built-in LCD display, but you
can also connect the following types of external display
devices to the video ports described below:
❖
A standard television, projector, or VCR/DVD player via
the S-video Out port
❖
An external monitor or projector via the RGB (monitor)
Out port
Before connecting a television, video projector, monitor or
other external display device, configure your computer for
the type of device you are connecting. To do this, refer to the
documentation for your operating system and the device.
RGB (Monitor Out)
Sample left side of system
Connecting the display device
If you are connecting an SVGA monitor, skip to
an external monitor or projector" on page
Selecting video cables
To connect a device to the S-video port, you must purchase an
S-video cable. For the best video quality, always use a
properly shielded cable.
port
HINT: Toshiba recommends using a cable no longer than
20 feet (approximately 6 meters).
S-video Out port
"Connecting
73.
Advertisement
Table of Contents
