Toshiba F25Series User Manual page 107

mode. The on/off light blinks amber to indicate the machine
is in Standby mode.
If you power down using the Standby command and the
battery discharges fully, your information will be lost. Be sure
to save your work often.
Going into Standby mode more quickly
There are three other ways to put the computer into Standby
mode:
❖
By pressing the power button
❖
By closing the display panel
❖
By pressing the hot key combination
This section describes how to set up your Standby options for
the first two methods. For information about the hotkey
combination, see
To set up your Standby options:
1 Click Start, Control Panel.
The Control Panel window appears.
2 Click Performance and Maintenance.
3 Double-click the Toshiba Power Saver icon.
The TOSHIBA Power Saver Properties window appears.
4 Click to select a profile.
5 Click the Setup Action tab.
6 Select Stand By for the options you want.
❖
When I press the power button
Set this option to Stand By so that the computer will
go into Standby mode when you press the power
button.
Learning the Basics
Powering down the computer
"Standby mode" on page
107
+
Fn F3
296.