Connecting External Display Devices; Connecting The Display Device - Toshiba Qosmio G35 User Manual

Connecting external display devices

Your computer comes with a built-in LCD display, but you
can also connect the following types of external display
devices to the video ports described below:
❖
A plasma or digital television or VCR/DVD player via
the Component Out port
❖
A standard television, projector, or VCR/DVD player via
the S-video Out port
❖
An external monitor or projector via the RGB (monitor)
Out port
Before connecting a television, video projector, monitor or
other external display device, configure your computer for
the type of device you are connecting. To do this, refer to the
documentation for your operating system and the device.
Coaxial Antenna In port
Sample back of system
You cannot connect both the S-video Out port and the
Component Out port to the same device at the same time.
The system display default is set at the factory to S-video Out.

Connecting the display device

If you are connecting a television or other video display
device to the computer's Component Out port, first refer to
"Selecting video cables" on page 68
choosing a video cable, then refer to
television, projector, or VCR/DVD player" on page
Connecting external display devices
RGB (Monitor) Out port
Component Out port
S-video Out port
Getting Started
for guidelines on
"Connecting a standard
67
70.