Table of Contents
Advertisement
Connecting external display devices
Your computer comes with a built-in LCD display, but you
can also connect the following types of external display
devices to the video ports described below:
❖
A plasma or digital television or VCR/DVD player via
the Component Video Out port.
❖
A standard television, projector, or VCR/DVD player via
the S-video Out port.
❖
An external monitor or projector via the RGB (monitor)
Out port.
Before connecting a television, video projector, monitor or
other external display device, configure your computer for
the type of device you are connecting. To do this, refer to the
documentation for your operating system and the device.
Connecting the display device
If you are connecting a television or other video display
device to the computer's Component Video Out port, first
refer to
choosing a video cable, then refer to
television, projector, or VCR/DVD player'
If you are connecting an SVGA monitor, skip to
an external monitor or projector" on page
Selecting video cables
To connect a device to the S-video port, you will need to
purchase an S-video cable. For the best video quality, always
use a properly shielded cable.
Connecting external display devices
"Selecting video cables"
HINT: Toshiba recommends using a cable no longer than
20 feet (approximately 6 meters).
Getting Started
below for guidelines on
'Connecting a standard
below.
76.
73
"Connecting
Advertisement
Table of Contents
