Advertisement
SG Series: Head Wash Procedure
Performing Head Wash
1. From the SETUP prompt press [MENU]
2. Press the left arrow key to enter the service menu. Press the down arrow key until SUB MENU appears.
Press the left arrow to enter the SUB MENU.
3. Press the left arrow to enter the SUB MENU. Press the down arrow until HEAD WASH appears.
4. Press [ENTER] to begin the head wash process.
5. Empty drain bottle when prompted and press [ENTER].
6. When prompted to [REMOVE CARTRIDGE 1,2,3,4]. Remove all 4 cartridges.
7. Replace any two ink pouches with the TR-CL cleaning liquid pouches.
8. When prompted to [SET CL-LIQUID 1, 3] insert the TR-CL pouches you prepared earlier into slots 1 and
3.
DO NOT SKIP THIS STEP
Advertisement
