Download Print this page
Roland TruVis SG Quick Start Manual
Roland TruVis SG Quick Start Manual

Roland TruVis SG Quick Start Manual

Advertisement

Quick Links

Roland TruVis SG/VG
SUMMER STORAGE REQUIREMENTS
TO DO
before leaving your Roland Printer/Cutter Unattended for an
extended break (more than 2 weeks)
1. The Roland vinyl printer/cutter machines are precise devices that require proper care
in order to maintain accuracy and functionality – which includes performing a
wash procedure
2. Be sure to have at least the minimum number of
perform the head wash and to re-ink the machine when you return in the Fall.
empty your drain bottle
3. Be sure to
the lines does use a significant amount of drain space, and the bottle cannot be
emptied during the head wash process.
4. Be sure to dispose of your drain bottle/cartridges properly, adhering to local guidelines.
PERFORM A HEAD WASH PROCEDURE:
1. Follow the instructions on the following page to
2. The process does take time, so give yourself an hour or two to complete the procedure.
The overall time will depend on your machine model and dedicated time in front of the
unit.
3. After the head wash is complete,
within a regulated temperature/humidity environment.
4. Remove any media from the roller, cover any open media rolls to prevent dust buildup.
5. Turn off the printers Sub Power and Main Power Switch on the back of the Printer.
6. Unplug the Printer.
Please remember that
could cause problems when returning in the Fall or shortly
related issues may not be covered under your machines warranty/extended warranty
If you have any questions regarding this process, you can email
support@alleghenyedusys.com, or call us at 800-232-7600.
Please put a copy of these instructions with the machine as a reminder.
This will help avoid extra repairs, service calls, jams, malfunctions, and other performance issues.
320 E. 3
Ave., Tarentum, PA 15084 724-230-2400 or 800-232-7600
rd
during extended downtime.
prior to starting the process. Removing ink from
store your ink cartridges on a level
failure to do a head wash will cause ink-build up in the system and
cleaning cartridges
perform a head wash on your printer.
thereafter. These storage
www.alleghenyedusys.com
head
necessary to
surface, and
Page | 1

Advertisement

loading

Summary of Contents for Roland TruVis SG

  • Page 1 Roland Printer/Cutter Unattended for an extended break (more than 2 weeks) 1. The Roland vinyl printer/cutter machines are precise devices that require proper care in order to maintain accuracy and functionality – which includes performing a head wash procedure during extended downtime.
  • Page 2 SG-Series Head Wash Notice: All ink is discharged during this operation. This procedure should only be performed by, or under the guidance of an authorized Roland service agent. Before You Begin This procedure will require two (2) TR-CL cleaning cartridges and will take approximately 1 hour.
  • Page 3 SG Series: Head Wash Procedure Performing Head Wash 1. From the SETUP prompt press [MENU] 2. Press the left arrow key to enter the service menu. Press the down arrow key until SUB MENU appears. Press the left arrow to enter the SUB MENU. 3.
  • Page 4 SG Series: Head Wash Procedure 9. When prompted to [REMOVE CL-LIQUID 1 3] pull the 2 TR-CL pouches out just enough to disengage. You do not have to completely remove the ink trays. 10. When prompted to [SET CL-LIQUID 1, 3]. Gently push the ink trays back into place until they engage. The [WASHING HEAD] prompt will display.

This manual is also suitable for:

Truvis vg