Advertisement
SG Series: Head Wash Procedure
SG-Series Head Wash
Notice: All ink is discharged during this operation. This procedure should only be performed by, or under the
guidance of an authorized Roland service agent.
Before You Begin
This procedure will require two (2) TR-CL cleaning cartridges and will take approximately 1 hour.
Perform a manual cleaning and replace worn consumables such as wipers. See User Manual.
Entering Service Mode
1. Turn the main power on and the Sub Power off.
2. Using the arrow keys enter the sequence below:
3. Now press and hold down the Left, Down, and Right arrow keys while pressing the Sub Power key. The
machine will power on in Service Mode and display the SETUP prompt.
Advertisement
