Page 1
INSTRUCTION MANUAL FULL HD DOME CAMERA Please read this manual thoroughly before use and keep it handy for future reference.
Page 3
FCC COMPLIANCE STATEMENT This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC INFORMATION : This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules.
Page 4
IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 6. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
CONTENTS • INTRODUCTION • CONNECTION & VIDEO OUT CHECK (CVBS) • LENS ADJUSTMENT • CONTENTS OF PACKAGE • BASE INSTALLATION • STRUCTURE OF THE SETUP MENU • DC AUTO IRIS LENS • SPECIFICATIONS • EXTERNAL DIMENSION...
INTRODUCTION The 1/2.9” 2.1M Full HD CMOS camera, especially for closed circuit television CCTV and security surveillance application. Features: • High performance SONY 1/2.9” 2.1M EXMOR CMOS • 1.0 lux(Color), 0 lux(BW, IR LED ON) • Auto electronic shutter [1/60(1/50) ~ 1/50,000] and manual electronic shutter modes •...
CONNECTIONS & VIDEO OUT CHECK(CVBS) ① Power : 12V DC input, Use Certified/Listed Class 2 power source only. * If using DC 12V power adaptor, use power supply capable of supplying 6 Watts. ② Video : BNC connector used to connect the camera to a DVR, etc. ③...
BASE INSTALLATION 1. Make mounting holes and cable hole in the place (ceiling or wall) to which this dome camera is installed using the Drilling guide label. 2.Drill the mounting location, using the Drilling guide. 3.Attach the housing to the ceiling using suitable fasteners, PTS1 5x30 screws are supplied only use if they are suitable.
STRUCTURE OF THE SETUP MENU <SETUP> LENS EXPOSURE BACKLIGHT WHITE BAL <LENS> <EXPOSURE> DAY&NIGHT IMAGE SHUTTER FUNCTION MANUAL SYSTEM SENS-UP BRIGHTNESS EXIT D-WDR DEFOG RETURN <BACKLIGHT> <WHITE <IMAGE> <DAY&NIGHT BAL> > SHARPNESS AUTO AWC->SET HSBLC D-EFFECT COLOR INDOOR RETURN B&W OUTDOOR MANUAL <FUNCTION>...
Page 10
LENS The EXPOSURE menu is used to set the automatic light control method for the camera. It provides the ability to adjust the SHUTTER speed. AGC SENS-UP, BRIGHTNESS, D-WDR, and DEFOG functions of the camera. Select the DC mode. ▶INDOOR, OUTDOOR 1) DC Select the DC iris speed ▶...
Page 11
<EXPOSURE> Mode MAIN MENU SENS-UP EXPOSURE LENS SENS-UP DC EXPOSURE SHUTTER RETURN RET BACKLIGHT 14 WHITE BAL SENS-UP D-WDR AUTO DAY&NIGHT BRIGHTNESS 40 AUTO 5 IMAGE D-WDR ON LEVEL FUNCTION DEFOG RETURN RET SYSTEM RETURN RET...
Page 12
WHITE BALANCE The screen color can be adjusted by using the Auto White Balance function. It compensates for deviations in the white color caused by changes in the color temperature of the light source so that the colors are reproduced correctly. 1) ATW Automatically adjust color temperature.
Page 13
<DAY & NIGHT> Mode MAIN MENU D&N AUTO LENS DC 205 EXPOSURE BURST DN (CDS) 3 BACKLIGHT IR SMART DN (DELAY) ON WHITE BAL 165 RETURN ND (CDS) RET DAY&NIGHT 3 AUTO ND (DELAY) IMAGE RETURN RET...
Page 14
DISPLAY Adjust the Motion area window position & size Adjust the Motion sensitivity level ▶ 0 - 100 SENSITIVITY COLOR Select the motion area color ▶WHITE - Red, Green, Blue TRANS Select the motion area transparency. ▶1.0, 0.75, 0.5, 0.25 ALARM Select the Motion alarm VIEW TYPE...
Page 15
<FUNCTION> Mode FUNCTION 2DNR MIDDLE 3DNR MIDDLE MOTION RETURN RET PRIVACY DEFECT DET MOTION ALARM RETURN RET SELECT AREA1 VIEW TYPE DISPLAY OSD VIEW ON 64 3 SENSITIVITY TIME COLOR GREEN RETURN RET TRANS. 1.00 ALARM ...
Page 16
BLUE GAIN Adjust the Blue gain level ▶ 0 - 100 RED GAIN Adjust the Red gain level ▶ 0 - 100 GAMMA Select the gamma level ▶ USER, 0.45 - 1.0 Select the video out type ▶ NTSC, PAL 4) VIDEO OUT OSD menu LANGUAGE (16ea) ▶...
<AF> Mode MAIN MENU LENS DC EXPOSURE AF MODE SEMI ONE SHOT BACKLIGHT WHITE BAL TDN AF DAY&NIGHT LENS INIT AUTO IMAGE RETURN RET FUNCTION SYSTEM AF EXIT SAVE&END EXIT The EXIT menu provides the ability to adjust the RESET, SAVE & END and NOT SAVE functions of the camera.
SPECIFICATIONS MODEL 2M HD DOME CAMERA Power Source DC12V ± 10% Power Power Consumption MAX 6.0 Watts (500mA) Image sensor 1/2.9" 2.1M Sony CMOS Total Pixels 2000(H) x 1121(V) Active Pixels 1920(H) x 1080(V) Scanning system Progressive Internal Sync. System Video Frame Rate 1920x1080p@25 fps ;...
Need help?
Do you have a question about the HDV2212MB and is the answer not in the manual?
Questions and answers