Related Manuals for ATV C700TDN
Summary of Contents for ATV C700TDN
-
Page 1: Color Camera
INSTRUCTION MANUAL DNR Super High Resolution Day & Night Color Camera 1/3” INTERLINE TRANSFER CCD HIGH RESOLUTION Please read this manual thoroughly before use and keep it handy for future reference. -
Page 3: Warnings And Cautions
WARNINGS AND CAUTIONS TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. DO NOT INSERT ANY METALLIC OBJECT THROUGH THE VENTILATION GRILLS OR OTHER OPENINGS ON THE EQUIPMENT. CAUTION CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER(OR BACK). -
Page 4: Fcc Compliance Statement
FCC COMPLIANCE STATEMENT INFORMATION TO THE USER: THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH THE LIMITS FOR A CLASS A DIGITAL DEVICE, PURSUANT TO PART 15 OF THE FCC RULES. THESE LIMITS ARE DESIGNED PROVIDE REASONABLE PROTECTION AGAINST HARMFUL INTERFERENCE WHEN THE EQUIPMENT IS OPERATED IN A COMMERCIAL... -
Page 5: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. -
Page 6: Contents Of Package
CONTENTS OF PACKAGE Installation of the camera must be performed by qualified service personnel in accordance with all local and national electrical and mechanical codes. Carefully remove the color camera and its accessories from the carton and verify that they were not damaged in shipment. The contents of the package includes: 1. - Page 7 INTRODUCTION The camera provides high-quality images using SONY 1/3” CCD and digital Signal process LSIs. Features: ● 1/3" EXview HAD CCD Ⅱ for an image of high sensitivity ● Digital Wide Dynamic Range (Xtended Dynamic Range) ● Excellent picture quality ●...
-
Page 8: Camera Overview
CAMERA OVERVIEW Left Button Up Button Enter Button Right Button Down Button Power Indicator Video Output Connector (BNC) AC/DC Compatible Input Terminal AC Power Cord... -
Page 9: Osd Menu Structure
OSD MENU STRUCTURE SETUP MENU (page 1) LENS SHUTTER/AGC LENS SHUTTER/AGC WHITE BAL AUTO ↵ AUTO↵ BACKLIGHT MANUAL MANUAL↵ PICT ADJUST MOTION DET NEXT (page2) EXIT SAVE ALL WHITE BALANCE BACKLIGHT ATW ↵ PUSH USER 1↵ USER 2↵ ANTI CR MANUAL↵... - Page 10 SETUP MENU (page 2) PRIVACY PRIVACY DAY/NIGHT DAY/NIGHT AUTO COLOR CAMERA ID ON↵ B/W↵ LANGUAGE CAMERA RESET BACK (page 1) EXIT SAVE ALL CAMERA ID NR↵ NR MODE Y LEVEL ON↵ C LEVEL RETURN LANGUAGE CAMERA RESET ENGLISH (return the camera to 日本語...
- Page 11 LENS AUTO TYPE (DC / VIDEO) Sets the type of mechanical iris (Video lens is not supported) MODE (AUTO / OPEN / CLOSE ) Sets the type of control to be applied over the mechanical iris. SPEED (0 – 255) Sets the convergence speed of the mechanical iris.
-
Page 12: White Bal
WHITE BAL ATW (Auto Trace White balance) SPEED (0~255) Adjusts the pull-in speed of ATW. DELAY CNT (0~255) Sets the time-based hysteresis of ATW. ATW FRAME (x0.5 / x1 / x1.5 / x2) Sets the pull-in frame magnification. ENVIROMENT (INDOOR / OUTDOOR) Preset for either indoor or outdoor applications of the ATW PUSH Wide range Auto White Balance mode (AWB) -
Page 13: Motion Det
ATR (Adaptive Tone Reproduction) allows adjustment of the image to assist with widely contrasting scenes of view. LUMINANCE (LOW / MID / HIGH) Sets the extent of the luminance compression CONTRAST (LOW / MIDLOW / MID / MIDHIGH / HIGH) Sets the extent of the contrast enhancement MOTION DET DETECT SENSE (0~127) - Page 14 LEFT (NTSC:0~474 , PAL:0~468) 0 = left RIGHT (NTSC:0~474 , PAL:0~468) 474(468) = right COLOR (1~8) Sets the colors of the privacy zones. TRANSP (0.00 / 0.50 / 0.75 / 1.00) Sets the transparency of the privacy zone area if color is selected. MOSAIC (OFF / ON) Sets the mosaic function as the privacy to ON or OFF.
-
Page 15: Camera Reset
CAMERA ID Sets the camera ID to ON or OFF. A title of 52 characters per line can be applied. Use the joystick to navigate the cursor. Pushing centrally on the joystick will allow selection of that character. The arrows at the bottom allow you to move the cursor without changing the character. - Page 16 AUTO WHITE DEFECT Push the left button for 5 seconds and enter Auto white defect menu. Cover the lens and Enter for starting. If white defects are over 65pcs, the camera is faulty and auto defect is useless. Over 70'C Auto white defect can't be activated.
- Page 17 DC IRIS LENS The lens is not supplied with this camera. Purchase a lens suitable for your requirements. These cameras accept both C-and CS-mount type lens. <Notes > ● For using main functions it is recommended to use Auto Iris Lens with DC type.
-
Page 18: Specifications
SPECIFICATIONS MODEL NTSC Free Power source 100-240V~50Hz DC 12V AC 24V±10% ±1Hz Power Power consumption 3.5 Watts (300mA) 4.0 Watts(60mA) Image sensor 1/3″ SONY EXview HAD CCD II Total pixels 1020(H) x 508(V) 1020(H) x 596(V) Effective pixels 976(H)x494(V) 976(H)x582(V) Scanning system 2:1 Interlace 15.734KHz(H) - Page 20 DNR Super High Resolution Day & Night Color Camera PRINTED IN KOREA 50303278B...