Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for ATV BHR212MR
Summary of Contents for ATV BHR212MR
- Page 1 600TV Lines Super High Resolution Color Camera...
- Page 2 WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. DO NOT INSERT ANY METALLIC OBJECTS THROUGH THE VENTILATION GRILLS OR OTHER OPENINGS ON THE EQUIPMENT. CAUTION EXPLANATION OF GRAPHICAL SYMBOL The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of un-insulated "dangerous voltage"...
- Page 5 INTRODUCTION Camera Model Features: ● 1/3" Sony Super HAD CCD ● 600TVL colour & 620TVL monochrome resolution ● 0.1Lux (Colour), 0.04 Lux (B/W), 0.003Lux (Low-shutter) @ F1.2, 50IRE Sensitivity (sense-up x256 – 0.0004Lux (colour), 0.0001Lux (B/W) ● Auto electronic shutter and manual electronic shutter modes ●...
-
Page 7: Camera Adjustment
CAMERA FIXING Use the 3 location holes around the base of the bracket to secure the camera to a wall or ceiling using fixing suitable to the type of surface CAMERA ADJUSTMENT The camera is supplied with a remote control set up tool. To connect the remote control to the camera, first remove the Remote control port cap at the rear of the camera:... -
Page 8: Camera Connection
Connect the remote control using the 6 pin din connector end to the socket within the camera: Connect the BNC to a set up monitor to view the picture and On Screen Menus To Enter the menus press the button on the remote control. To Navigate the menus, move the button left/Right/Up and Down, press the button to Enter. - Page 9 CAMERA SET UP – OSD <MAIN MENU> EXPOSURE WHITE BALANCE DAY / NIGHT <WHITE BALANCE> PRIVACY <EXPOSURE> WB MODE DISPLAY LENS RED CONT SYNC BRIGHTNESS BLUE CONT INITIAL BACKLIGHT PUSH AUTO EXIT SHUTTER SENSE UP ECLIPSE 3D-DNR RETURN RETURN <PRIVACY> <DAY/NIGHT>...
- Page 10 OSD MAIN SCREEN All operation is via the tact switch - [CENTER] Turn OSD menu ON or OFF - [UP]/[DOWN] UP or DOWN of Cursor - [LEFT]/[RIGHT] to go into SUB MENU or change setting <EXPOSURE> Press the [LEFT] or [RIGHT] button to access the "EXPOSURE" mode. 1) LENS DC, ELC can be selected.
-
Page 11: Auto Level
<WHITE BALANCE> Press the [LEFT] or [RIGHT] button to access the "WHITE BALANCE" mode 1) WB MODE - ATW This mode can be used within the colour temperature range 1800°K ~ 10500°K - AWC Please press the [LEFT] or [RIGHT] button in the PUSH AUTO mode while the camera is directed at a piece of while paper to obtain the optimum state under current illumination. - Page 12 4) SENSOR IN When it is EXT, No or NC can be selected. 5) BURST Removes burst from B/W setting. (only available in B/W mode). 6) RETURN Return to MAIN MENU. <PRIVACY> Press the [LEFT] or [RIGHT] button to access the “PRIVACY” mode. 1) AREA 1 to 24 can be selected.
- Page 13 <OPTION> Press the [LEFT] or [RIGHT] button to access the "OPTION" mode 1) TITLE 2) NEGA/POSI NEGA or POSI image can be selected. 3) SHARPNESS 0 to 15 can be selected. 4) MIRROR NORMAL, MIRROR, VERTICAL, ROTATE can be selected. - MIRROR Horizontal image inversion - VERTICAL...
-
Page 14: Specifications
SPECIFICATIONS MODEL HCUI-G(H)5HNWxE2 Power source AC24V ± 10% / DC12V ± 10% Power Power consumption 8.0 Watts Image sensor 1/3” SONY Super-HAD CCD Total number of pixels NTSC : 811(H) x 508(V), PAL : 795(H) x 596(V) Scanning system 2:1 interlace NTSC : 15.734KHz(H) x 59.94Hz(V) Scanning frequency PAL : 15.625KHz(H) x 50Hz(V) - Page 15 Power input 2-Pin Terminal Block Video output BNC connector Day &Night System True ICR Lens mount Fixed mount Lens Varifocal DC auto iris Lens Connector Operating Temperature -10°C~+50°C [14°F~122°F] & Operating humidity 0~96% (non-condensing) IP Rating IP66 External Dimension (mm) 88(W) x 275(H) x 88(D)
- Page 16 50302798A...