Memory Expansion; Installing Memory Module - Toshiba 6100 User Manual

User's Manual
3. Grasp the card and remove it.
SD
CARD INDICATOR
SD
CARD
CAUTION: Make sure the SD card indicator is out before you remove
the card or turn off the computer's power. If you remove the card or turn
off the power while the computer is accessing the card you may lose data
or damage the card.

Memory expansion

You can install additional memory in the computer's memory module to increase the
amount of RAM.
CAUTION: Only memory modules with the following parts numbers can
be installed:
PA3126U-1M12:
PA3127U-1M25:

Installing memory module

To install a memory module, make sure the computer is in boot mode then:
1. Turn the computer off in boot mode. Refer to the
section in Chapter 3.
CAUTIONS: 1. If you use the computer for a long time, the memory
8-6
Figure 8-5 Removing an SD card
128 MB
256 MB
modules will become hot. In this case, let the memory
modules cool to room temperature before you replace
them.
Turning off the power