Removing Memory Module - Toshiba 6100 User Manual

User's Manual
7. Push the module down so that it lies flat and is secured by two latches.
CAUTION: Do not touch the connectors on the memory module or on the
computer. Debris on the connectors may cause memory access problems.
Figure 8-7 Inserting the memory module
8. Seat the cover and secure it with two screws.
9. When you turn the computer on, it should automatically recognize the total
memory capacity. Use the System Properties to verify that the added memory
is recognized. If it is not recognized, check the module's connection.

Removing memory module

To remove the memory module, make sure the computer is in boot mode then:
1. Turn the computer off and remove all cables connected to the computer.
CAUTIONS: 1. If you use the computer for a long time, the memory
2. Turn the computer upside down and remove the battery pack (refer to Chapter
6, Power and Power-Up
8-8
modules will become hot. In this case, let the memory
modules cool to room temperature before you replace
them.
2. Do not try to remove a memory module with the
computer turned on or turned off in Standby and
Hibernation mode. You can damage the computer and
the memory module.
Modes.)