Dvd-Rom Drive (Black) - Toshiba 6100 User Manual

Some CDs
run correctly, but
others do not

DVD-ROM drive (Black)

For more information, refer to Chapter 4,
Problem
You cannot access
a DVD in the drive
Hardware and system checklist
A foreign object in the drawer could block laser light
from reading the CD. Make sure there is no
obstruction. Remove any foreign object.
Check whether the CD is dirty. If necessary, wipe
it with a clean cloth dipped in water or a neutral
cleaner. See the CD/DVDs care
Chapter 4 for details on cleaning.
Check your config.sys and autoexec.bat files to
make sure they have the necessary drivers and
execution lines.
The software or hardware configuration may
be causing a problem. Make sure the
hardware configuration match's your software's
needs. Check the CD's documentation.
Check the type of CD you are using. The drive
supports:
Enhanced CD (CD-EXTRA), Photo CD, CD-R, CD-
ROM, CD-Rewritable, CD-ROM x A Mode 2
(Form1, Form2), CD-DA, CD-Text
If problems persist, contact your dealer.
Operating
Procedure
Make sure the drive's drawer is securely
closed. Press gently until it clicks into place.
Open the drawer and make sure the DVD is
properly seated. It should lie flat with the label
facing up.
section in
Basics.
9-11