Table of Contents
Advertisement
6
In the Select a modem list, select your modem type. If your modem
type does not appear, try reinserting the modem card. If you are using
an external modem that is connected to your device with a cable,
select Hayes Compatible on COM1.
7
You should not need to change any settings in Advanced. Most ISPs
now use a dynamically-assigned address. If the ISP you are
connecting to does not use a dynamically-assigned address, tap
Advanced and then the TCP/IP tab, and enter the address. When
finished, tap OK and then Next.
8
Enter the access phone number, and tap Next.
9
Select other desired options, and tap Finish.
10
In the Dialing Locations tab, specify your current location and phone
type (most phone lines are tone). These settings will apply to all
connections you create.
To start the connection, simply start using one of the following programs.
Your device will automatically begin connecting. Once connected, you
can:
■
Send and receive e-mail messages by using Inbox. Before you can
use Inbox, you need to provide the information it needs to
communicate with the e-mail server. For specific instructions, see
"Connect Directly to an E-mail Server," later in this chapter.
■
Visit Web and WAP pages by using Pocket Internet Explorer. For more
information, see Chapter 6.
■
Send and receive instant messages with MSN Messenger. For more
information, see "MSN Messenger" in Chapter 5.
To create an Ethernet connection to an ISP:
1
You do not need to create a new connection on your device. Instead,
you must purchase and configure an Ethernet card that is compatible
with your device.
2
Obtain the following information from your ISP: user name, password,
and domain name.
3
Insert the Ethernet card into your device. For instructions on inserting
and using the Ethernet card, see the owner's manual for the card.
The first time you insert the card, Network Settings will appear
4
automatically so that you can configure the Ethernet card. Most
networks use DHCP, so you should not have to change these settings
unless your network administrator instructs you to do so. Tap OK. (If it
does not appear or to change settings later, tap
In the Connections tab, tap Network Adapters, tap the adaptor you
want to change, and then tap Properties.)
5
Connect the Ethernet card to the network by using a network cable.
For information, see your owner's manual.
6
Tap
My network card connects to list, select The Internet.
User's Manual
, Settings, Connections tab, and then Connections. From the
Getting Connected
and then Settings.
7-3
Advertisement
Table of Contents
