Table of Contents
Advertisement
Scan Page
Use Scan page to scan and select the available Access Points and
802.11 Ad Hoc networks.
Click Start > Settings > System > Wireless LAN Utility > Scan
■
Rescan: The Scan Page displays the available local wireless Access
Points and 802.11 Ad Hoc networks. If you don't see all the 802.11b
networks you are expecting, click "Rescan" button. Double click the
BSSID field to choose the wireless network you want to connect with.
Once the wireless network is chosen, Scan page will disappear and
Link page with current link information will display automatically.
■
Network Selection: Each Access Point is identified by its BSSID and
SSID. Double-click on the BSSID to choose the Access Point/802.11
Ad Hoc group you want to connect with.
■
Signal: Indicates the signal strength of the Access Point.
■
Channel: Indicates what channel the network is set to use.
■
Encryption (Scroll to the right): Indicates whether or not encryption
has been enabled.
User's Manual
Wi-Fi (IEEE 802.11b) WLAN Adaptor
Access Point Icon
802.11 Ad Hoc Network Icon
8-10
Advertisement
Table of Contents
