Toshiba e740 User Manual page 150

ATI Presentation Pack
Blank
When you select Blank, your LCD screen will become completely black,
and the black screen will also be projected to your VGA screen. (After you
have selected Blank, the command name changes to Restore. Tap
Restore when you are ready to return to the slide that was previously
displayed.)
Using the Blank Option with Pen Mode:
When the Blank option is active and IA Presenter is in Pen mode, you can
write or draw digital Ink on the screen, and it will be output to the VGA
device. In effect, this allows you to project an "electronic blackboard"
which you might find useful when giving a presentation to an audience.
Be aware that any Ink strokes you draw on the Blank screen will be lost
when you exit Blank mode. They cannot be retained.
When IA Presenter is in VGA Zoom mode or VGA Pointer mode, the
Blank option is not available.
Clear Last Pen
Erases the last individual Ink stroke. This command can be applied
repeatedly until there are no more Ink strokes in the current slide.
Clear All Pen
Erases all the pen strokes on the current slide.
Speaker Notes
This command displays the current slide's Note text (if any) in a pop-up
window, with the slide number also shown, on top of the displayed slide.
To advance the slide or object when the Speaker Notes window is shown,
tap on the underlying slide. When you advance the slides, the Speaker
Notes window remains open and interactively displays the Note text of
the related slide. To close the Speaker Notes window, tap the "X" in the
upper right corner.
End Show
This command terminates the Slide Show playback mode and returns to
the mode you were using prior to entering Slide Show mode. The Action
button on your Pocket PC can also be used to exit Slide Show mode.
User's Manual 10-9