Table of Contents
Advertisement
B2: How can I connect my Pocket PC to the usable Wireless
Network?
Please click Start > Settings > System > Wireless LAN Utility > Scan to
view Scan Page where you can find the usable Wireless Network. If you
cannot see all the networks you are expecting, please click "Rescan" to
see the list of usable Wireless Networks. Choose one Wireless Network
you want and double click the BSSID to connect to the network. Once the
network is chosen, you need to conFigure the IEEE802.11b WLAN
adaptor.
Click Start > Settings > Connections > Network Adaptors > IEEE802.11b
WLAN Adaptor > Properties > IP Address to set IP address, Subnet mask
and Default gateway settings. Click Start > Settings > System > Wireless
LAN Utility to edit other settings, such as Mode and SSID etc. If the WEP
Mode of the Wireless Network you selected is enabled (64bit or 128bit
WEP Mode), please choose the proper WEP KeyID and the proper WEP
Key value network.
More Information
B4. What is 802.11 Ad Hoc Network? What should I do to form an
B6. Could I use the 802.11 Ad Hoc Mode to access the LAN resources?
B7. What should I do if my host computer cannot wirelessly connect
E1. What is WEP? E2. How many WEP security service mode does
E3. How to set the WEP security service?
B3: How do I know whether or not my Pocket PC has already
connected to an AP successfully?
1
Check BSSID. When there is a link, the current Basic Service Set ID of
the Access Point been used will be shown in the BSSID field in Link
Page. When the adaptor is disconnected with the Access Point, "Non-
associated" will appear in the BSSID field. To view BSSID, from your
Pocket PC, click Start > Settings > System > Wireless LAN Utility >
Link.
2
Check Link Quality. Link Quality shows how clearly the adaptor can
hear the Access Point. If the quality is poor, it's better to rescan and
find a better performance Access Point or re-arrange the AP's position
for better performance. To view Link Quality, from your Pocket PC,
click Start > Settings > System > Wireless LAN Utility > Config.
User's Manual
802.11 Ad Hoc Network? B5. What is the difference between
"Infrastructure" and "802.11 Ad Hoc" Network Mode? How do I
choose?
How can I access the LAN resource without an Access Point?
with my Pocket PC?
Wireless LAN support?
FAQ about Wireless LAN
A-2
Advertisement
Table of Contents
