Table of Contents
Advertisement
End a Connection
To disconnect, do one of the following:
■
When connected via dial-up or VPN, tap the Connection icon, , on
your navigation bar, and then tap End.
■
When connected via cable or cradle, detach your device from the
cable or cradle.
■
When connected via Infrared, move the device away from the PC.
■
When connected via a network (Ethernet) card, remove the card from
your device.
Connect Directly to an E-mail Server
You can set up a connection to an e-mail server so that you can send and
receive e-mail messages by using a modem or network connection and
Inbox on your device.
The ISP or network must use a POP3 or IMAP4 e-mail server and an
SMTP gateway.
You can use multiple e-mail services to receive your messages. For each
e-mail service you intend to use, first set up and name the e-mail service.
If you use the same service to connect to different mailboxes, set up and
name each mailbox connection.
To set up an e-mail service:
■
In Inbox on your device, tap Services, and then New Service. Follow
the directions in the New Service wizard.
For an explanation of a screen, tap
connect to your e-mail server, tap Services and then Connect. For more
information on using the Inbox program, see "Inbox: Sending and
Receiving E-mail Messages" in Chapter 4.
Get Help on Connecting
More information on the procedures described here, as well as
information on additional procedures, can be found in the following
locations:
■
"Inbox: Sending and Receiving E-mail Messages" in Chapter 4.
■
Online Help on the device. Tap
Installed Help, and then Inbox or Connections.
■
ActiveSync Help on the computer. In ActiveSync, click Microsoft
ActiveSync Help on the Help menu.
■
For troubleshooting information, see the Pocket PC Web site at:
http://www.microsoft.com/mobile/pocketpc
User's Manual
and then Help. When finished, to
and then Help. Tap View, All
Getting Connected
7-6
Advertisement
Table of Contents
