Opening A Presentation And Using View Modes - Toshiba e740 User Manual

Opening a Presentation and Using View Modes

When you invoke IA Presenter, the first screen that appears lists all the
converted PowerPoint presentations currently in your \My Documents
folder. Tap on the name of the file you want to load. You can then choose
from the following view modes.
Normal View
Normal view allows you to view the current slide in the upper pane, while
still able to navigate slides conveniently using the lower thumbnail pane.
You can drag the Splitter Bar that divides the two panes up or down, to
adjust the screen distribution above and below the splitter. The Normal
View icon is located at the leftmost side of the Toolbar, as shown below.
You can also use the stylus to pan the slide image in the upper pane to
show the part covered by the lower pane. The splitter position will
automatically be remembered across multiple application sessions,
freeing you from having to adjust the splitter position again during the
current IA Presenter session.
To display a different slide in the upper pane, simply tap on the desired
thumbnail in the lower pane, or use the Slide Title Bar (unnamed slides
will be represented by a number in the Slide Title Bar drop-down list). The
lower thumbnail pane in Normal view provides slide navigation. If you
want to select multiple slides for further operations, use the Slide Sorter
view, as explained in the next section.
You can project the currently selected slide to VGA Display by activating
the VGA Slide Toggle command on the View Menu, or by tapping the
VGA Slide Output Toggle icon at the rightmost side of the Toolbar. To
end the projection, select the command again to toggle it off.
Slide Sorter
Slide Sorter view fills the entire application space with either large or
small thumbnails, depending on whether Large Thumbnail or Small
Thumbnail is active on the View Menu. You can select:
■
One slide by tapping on it, or
■
Multiple adjacent slides by dragging your stylus over them, or
■
If you select Multiple Select Mode on the Edit Menu, you can tap,
drag, or a combination thereof, to select multiple slides that are
separated.
Selected slides will be highlighted by a different border color.
You can project an individual slide to the VGA output by activating the
VGA Slide Toggle command on the View Menu, or by tapping the VGA
Slide Output Toggle icon at the rightmost side of the Toolbar. When you
activate this function:
■
If one slide is selected at the time you toggle the VGA Slide Output
"on," that slide will be output to the VGA Display.
■
If multiple slides happen to be selected, the first selected slide in the
sequence will be output to the VGA Display.
User's Manual
ATI Presentation Pack
10-4