You can set the power-on delay time to have the screen opening successively to avoid the power fault caused
by the simultaneously bulk startup.
3.6.5 Others
Purpose:
Click Others to enter the page. You can set the no-signal screen mode and OSD menu on this page.
No-Signal Screen Mode
Steps:
1. Select Black, Blue or Show Logo to change the screen to be blue, black and display a logo respectively when
there is no video signal received.
2. Click Set to save the settings. After set the settings, the screen change to the status you set.
OSD Menu
Steps:
1. Select language, transparency and disappearance time for the OSD menu.
2. Click Set to complete the settings.
LCD Monitor User Manual
Time Settings (3)
Figure 3. 39
Set Power-On Delay Time
Figure 3. 40
34