Ii-2-2-7 Details Page For Pptp - Draytek Vigor2620 LTE Series User Manual

I I - 2 - 2 - 7 D
I I - 2 - 2 - 7 D
To use PPTP as the accessing protocol of the internet, please click the PPTP tab. The
following web page will be shown.
Available settings are explained as follows:
Item
PPTP
ISP Access Setup
MTU
80
e t a i l s P a g e f o r P P T
e t a i l s P a g e f o r P P T
Description
Enable - Click this radio button to enable a PPTP client to
establish a tunnel to a DSL modem on the WAN interface.
Disable – Click this radio button to close the connection
through PPTP.
Server Address - Specify the IP address of the PPTP server if
you enable PPTP client mode.
Specify Gateway IP Address – Specify the gateway IP address
for DHCP server.
Username -Enter the username provided by ISP in this field.
The maximum length of the user name you can set is 63
characters.
Password -Enter the password provided by ISP in this field.
The maximum length of the password you can set is 62
characters.
Index (1-15) in Schedule Setup - You can Enter four sets of
time schedule for your request. All the schedules can be set
previously in Application >> Schedule web page and you can
use the number that you have set in that web page.
It means Max Transmit Unit for packet.
Path MTU Discovery – It is used to detect the maximum MTU
size of a packet not to be segmented in specific transmit
path.
Click Detect to open the following dialog.
P
P
Vigor2620 Series User's Guide