Draytek Vigor2620 LTE Series User Manual page 509

object mail obj INDEX -i Sending Interval
S S y y n n t t a a x x
Parameter
show
setdefault
INDEX -v
INDEX -n Profile Name
INDEX -s SMTP Server
INDEX -l Use SSL
INDEX -m SMTP Port
INDEX -a Sender Address
INDEX -t Authentication
INDEX -u Username
INDEX -p Password
INDEX -i Sending Interval
E x a m p l
E x a m p
Vigor2620 Series User's Guide
D D e e s s c c r r i i p p t t i i o o n n
Description
It means to show the contents for all of the profiles.
It means to return to default settings for all profiles.
It means to view the information of the specified mail object
profile.
INDEX: Enter the index number (from 1 to 10) of the
specified mail object profile.
It means to define a name for the mail object profile.
INDEX: Enter the index number (from 1 to 10) of the
specified mail object profile.
Profile Name: Enter a name with less than 15 characters.
It means to set the IP address of the mail server.
INDEX: Enter the index number (from 1 to 10) of the
specified mail object profile.
SMTP Server: Enter the name or the IP address of the SMTP
server.
It means to use port 465 for SMTP server for some e-mail
server uses https as the transmission method.
INDEX: Enter the index number (from 1 to 10) of the
specified mail object profile.
Use SSL: Enter 0 or 1.
0 – disable
1 – enable to use the port number.
It means to set the port number for SMTP server.
INDEX: Enter the index number (from 1 to 10) of the
specified mail object profile.
SMTP Port: Enter a port number.
It means to set the e-mail address of the sender.
INDEX: Enter the index number (from 1 to 10) of the
specified mail object profile.
Sender Address: Enter the e-mail address (e.g.,
johnwash@abc.com.tw).
The mail server must be authenticated with the correct
username and password to have the right of sending message
out.
INDEX: Enter the index number (from 1 to 10) of the
specified mail object profile.
Authentication: Enter 0 or 1.
0 – disable
1 – enable to use the port number.
Type a name for authentication. The maximum length of the
name you can set is 31 characters.
INDEX: Enter the index number (from 1 to 10) of the
specified mail object profile.
Username: Enter a string as a username.
Type a password for authentication. The maximum length of
the password you can set is 31 characters.
INDEX: Enter the index number (from 1 to 10) of the
specified mail object profile.
Password: Enter a password.
Define the interval for the system to send the SMS out. The
unit is second.
INDEX: Enter the index number (from 1 to 10) of the
specified mail object profile.
Sending Interval: Enter a value (seconds).
e
l e
497