Advertisement
12. MAINTENANCE
Never use a high pressure type car wash system, it can damage to the
wheel bearings, transmission seals, body panels, brakes and warning
labels, and water might enter the engine or exhaust system.
The best and safest way to clean your ATV is with a garden hose and a
pail of mild soap and water. Use a professional type washing mitten,
cleaning the upper body first and lower parts last. Rinse with water
frequently and dry with a chamois to prevent water spots. NOTE: If
warning labels are damaged, contact your dealer for replacement.
Warning
Your ATV can be waxed with any non-abrasive automotive paste wax.
Avoid the use of harsh cleaners since they can scratch the body finish.
CAUTION
Certain products, including insect repellants and chemicals, will
damage plastic surfaces. Care must be taken when using these
products plastic surfaces.
STORAGE TIPS
CAUTION
Do not start the motor during the storage period. This will disturb the
protective film created by fogging.
Cleaning——Clean the ATV thoroughly.
Inspect All Fluid Levels——Inspect the following fluid levels and
change if necessary: transmission; brake fluid (change every two years
or as required if fluid looks dark or contaminated).
Check and Lubricate Cables/Grease——Inspect all cables and
lubricate.
OWNER'S/OPERATOR'S MANUAL
LH40DA
18.0
12- 21
Advertisement
