Advertisement
12. MAINTENANCE
Check brake system for fluid leaks.
Check brake for excessive travel
Or spongy feel.
Check friction pads for wear,
damage and loosened.
Check security and surface
condition of the disc.
Pads should be changed when friction material is worn to
3/64"(1mm).(A)
Rear and Auxiliary Brake
Rear Brake
The rear brake is a hydraulic disc type brake which is activated by the same pedal
which activates the front brake system is self adjusting and requires no
maintenance other than periodic checks of the pads for wear
Pads should be changed when the friction material is worn to
3/64"(1mm).
Inspect the brake disc spline and pad wear surface for excessive
wear.
Auxiliary Brake Systems
Your ATV's auxiliary brake system is intended to be used as a backup
for the main brake system. Should the main system fail, the rear brake
can be activated by the brake lever being moving toward the handlebar.
The hydraulic brake system will not require adjustment.
NOTE: Since this is a rear brake only, it will not be as effective as the all
wheel system
Checking
Although the parking brake has been adjusted at the factory, the brake
should be checked for proper operation. The mechanical brake must be
OWNER'S/OPERATOR'S MANUAL
LH40DA
18.0
12- 16
Advertisement
