Using Your Murphy Bed; Final Check Of Bed Cabinet Installation - I-Semble REVISED VERTICAL MURPHY BED Instructions Manual

Stud and lag bolt locations
in this image are for
illustration purpose only.
Locations for 1/4" x 3"
Washer Head Lag Bolts (KK)
installed through Lower
Headboard into wooden
wall studs are obscured by
mattress in this illustration;
see Page 11 for locations

Final Check of Bed Cabinet Installation

Using your Murphy Bed

> The bed will not stay down without the weight of
a mattress. You MUST have an adult helper hold
down the bed to avoid the risk of serious injury
from the bed suddenly slamming shut.
> Do NOT use a foam or very light mattress with this
product. See required weight specifications on p. 3.
> TO AVOID THE RISK OF SERIOUS INJURY,
DO NOT ALLOW CHILDREN TO PLAY ON
THE BED UNIT OR OPERATE IT WITHOUT
ADULT SUPERVISION.
1. Once the bed unit has been assembled correctly and
secured to the wall, pull the bed down and, while
holding the frame securely, pivot the Leg assembly
so that it will support the frame when it is
fully lowered.
20
54386 55991 54877
Rev 01/18
Stud Locations
1/4" x 3"
Washer Head
Lag Bolts (KK)
installed
through Upper
Headboard
into wooden
wall studs
Check Rockler.com for updates. If you have further questions, please
contact our Technical Support Department at 1-800-260-9663
or support@rockler.com
Cover Size
2. Have an adult helper hold the bed frame down while
you slide the mattress onto the frame.
3. To return the bed to the cabinet, hold the frame and
pivot the Leg assembly up and over the end of the
mattress. The Leg assembly serves as a mattress
retaining system.
4. Using the handles on the Door Panels, slowly
and carefully allow the bed to tilt up into the cabinet.
Distributed by Rockler Companies, Inc.
Medina, Mn 55340
Wall Brackets (HH)
bolted into wooden
wall studs