Knee Lifter Posotion - Janome SKYLINE S6 Service Manual

Knee lifter posotion

Presser bar lifter
(A)
Mechanical adjustment
Clearance
Knee lifter lever 1
Clearance
Adjusting screw
(B)
To adjust:
1. Remove the top cover.
2. Open the face cover.
3. Remove the zigzag foot A.
4. Insert the knee lifter to the machine with the handle
side up as sh.
5. Turn the knee lifter to the left to raise the presser foot.
Be sure that there are clearances (clearance (upper)
and clearance (lower)) between the knee lifter lever 1
and presser bar lifter.
Be sure that the knee lifter shaft and the knee lifter
lever 1 engage smoothly without play.
* Turn the adjusting screw to the direction (A) to up
the knee lifter lever 1.
* Turn the adjusting screw to the direction (B) to down
the knee lifter lever 1.
6. Remove the zigzag foot A.
7. Close the face cover.
8. Attach the top cover.
33