Top Cover - Janome SKYLINE S6 Service Manual

Setscrew A
Face cover
Carrying handle
Bobbin winder spindle
Flange plate
Setscrew B Setscrew C
Replacing external parts

Top Cover

Top cover
Top cover
To remove:
1. Raise the carrying handle and remove the setscrew A.
2. Open the top cover. Pull out the flange plate from the
bobbin winder spindle.
3. Remove the setscrews B and C.
4. Open the face cover. Close the top cover and raise
the carrying handle.
Pull the top cover toward you to remove it.
To attach:
Follow the above procedure in reverse.
To attach the flange plate, put the flange plate on to the
bobbin winder spindle, and push the flange plate down.
Turn the flange plate until it snaps to the pin of the
bobbin winder spindle.
2