Setscrew A
Setscrew B
Setscrew C
Replacing external parts
Rear cover
To remove:
1. Lower the presser foot. Remove the belt cover, top
2. Loosen the setscrew A.
3. Loosen the setscrew B.
4. Remove the four setscrews C.
Hole D
5. Push the rear cover from the holes D and E with a
6. Remove the rear cover.
To attach:
Follow the above procedure in reverse.
Hole E
6
cover and base cover (refer to pages 1 to 3).
screwdriver to remove the hook of rear cover.