U.s. Epa Emissions Limited Warranty; Emission Control System Components - Mercury MerCruiser 6.2 Inboard MPI DTS Manual

Table of Contents

Advertisement

Section 1 - Warranty
The operator may not modify the engine in any manner that alters the horsepower or allows emission levels to exceed factory
specifications.

U.S. EPA Emissions Limited Warranty

Consistent with the obligations created by 40 CFR Part 1045, Subpart B, Mercury Marine provides an emission warranty of
three years or 480 hours of engine use whichever occurs first to the retail purchaser, that the engine is designed, built, and
equipped so as to conform at the time of sale with applicable regulations under section 213 of the Clean Air Act, and that the
engine is free from defects in materials and workmanship which cause the engine to fail to conform with applicable regulations.

Emission Control System Components

The emission‑related warranty covers all components whose failure would increase an engine's emission of any regulated
component including the following list of components:
1.
Fuel metering system
a.
Carburetor and internal parts (or fuel pressure regulator or fuel injection system)
b.
Air/fuel ratio feedback and control system
c.
Cold start enrichment system
d.
Intake valves
2.
Air induction system
a.
Controlled hot air intake system
b.
Intake manifold
c.
Air filter
d.
Turbo charger systems
e.
Heat riser valve and assembly
3.
Ignition system
a.
Spark plugs
b.
Magneto or electronic ignition system
c.
Spark control system
d.
Ignition coil or control module
e.
Ignition wires
4.
Lubrication system
a.
Oil pump and internal parts
b.
Oil injectors
c.
Oil meter
5.
Positive crankcase ventilation (PCV) system
a.
PCV valve
b.
Oil filler cap
6.
Exhaust system
a.
Exhaust manifold
b.
Exhaust elbow
c.
Intermediate exhaust elbow
d.
Lower exhaust pipe
e.
Tailpipe
7.
Catalysts or thermal reactor system
a.
Catalytic converter
b.
Thermal reactor
c.
Exhaust manifold
d.
Exhaust valves
8.
Miscellaneous items used in above systems
a.
Hoses, clamps, fittings, tubing, sealing gaskets or devices, and mounting hardware
b.
Pulleys, belts, and idlers
c.
Vacuum, temperature, check and time sensitive valves and switches
d.
Electronic controls
Page 8
90-8M0099741
JUNE 2015
eng

Advertisement

Table of Contents
loading

Table of Contents