Advertisement
Installation
Locate the power adapter
3
harness and transformer.
Attach two of the .250
spade-lugs to the 120VAC
mating connectors on the
transformer, as shown.
Typically, they are light
blue. Polarity matching is
not required.
Inside the back-splash of
4
the machine, locate the
main AC power lines
coming out of the internal
transformer. Install the
.250 tap-splices (one on
white, one on black) as
shown.
Connect the matching
5
.250 spade-lugs to the
taps that you just
installed. White wire to
white wire, black wire
to black wire.
www.heartlandmicropayments.com
7
Advertisement
