Advertisement
24
If the test was successful, disconnect power
from the laundry machine, and proceed to step
25. If the test cycle failed, refer to the
"WaveRider Trouble-Shooting Guide" to resolve
the issue, before proceeding to step 25.
25
26
Using a ratchet
driver. Bolt the
reader bracket
to the machine
with the SRW-
1032X.50HM
screw and #10
washer.
Open the service panel and back-splash.
Using cable-ties and cable-tie mounts,
secure all wiring harnesses to prevent
pinching, wire-strain, and chafing.
Failure to perform this step could
void the product warranty.
www.heartlandmicropayments.com
15
Advertisement
