Bosch AL 1810 CV Original Instructions Manual page 8

8 | English
What the display elements mean
Flashing battery charge indicator (3)
The charging process is indicated by the flash-
ing of the battery charge indicator (3).
Solid light on battery charge indicator (3)
A solid light on the battery charge indicator
(3) signals that the battery is fully charged or
that the temperature of the battery is not
within the permitted charging temperature
range, and can therefore not be charged. The battery is
charged as soon as the allowable charging temperature
range is reached.
When the battery is not inserted, a solid light on the battery
charge indicator (3) signals that the mains plug is inserted in
the plug socket and that the charger is ready for operation.
Errors – causes and corrective measures
Cause Corrective measures
Battery charge indicator (3) stays lit
Charging not possible
The battery is not connected Connect battery to charger
(correctly) correctly
Battery contacts are dirty Clean the battery contacts;
e.g. by connecting and dis-
connecting the battery sev-
eral times. Replace battery if
necessary
Battery defective Replace the battery
Battery charge indicator (3)does not light up
Mains plug of the charger is Insert the mains plug (fully)
not (correctly) plugged in into the plug socket
Plug socket, mains cable or Check the mains voltage,
charger defective have the charger checked if
necessary by an authorised
after-sales service centre for
Bosch power tools
Practical advice
When the charger is used continuously, or for several con-
secutive charge cycles without interruption, the charger may
heat up. This is, however, harmless and does not indicate
that the charger has a technical defect.
A significantly reduced operating time after charging indic-
ates that the battery has deteriorated and must be replaced.
Maintenance and Service
Maintenance and cleaning
In order to avoid safety hazards, if the power supply cord
needs to be replaced, this must be done by Bosch or by an
1 609 92A 4XZ | (15.04.2019)
after-sales service centre that is authorised to repair Bosch
power tools.
After-Sales Service and Application Service
Our after-sales service can answer questions concerning
product maintenance and repair, as well as spare parts. You
can find exploded drawings and information on spare parts
at: www.bosch-pt.com
The Bosch product use advice team will be happy to help you
with any questions about our products and their accessor-
ies.
In all correspondence and spare parts orders, please always
include the 10‑digit article number given on the type plate of
the product.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham Uxbridge
UB 9 5HJ
At www.bosch-pt.co.uk you can order spare parts or arrange
the collection of a product in need of servicing or repair.
Tel. Service: (0344) 7360109
E-Mail: boschservicecentre@bosch.com
Ireland
Origo Ltd.
Unit 23 Magna Drive
Magna Business Park
City West
Dublin 24
Tel. Service: (01) 4666700
Fax: (01) 4666888
Australia, New Zealand and Pacific Islands
Robert Bosch Australia Pty. Ltd.
Power Tools
Locked Bag 66
Clayton South VIC 3169
Customer Contact Center
Inside Australia:
Phone: (01300) 307044
Fax: (01300) 307045
Inside New Zealand:
Phone: (0800) 543353
Fax: (0800) 428570
Outside AU and NZ:
Phone: +61 3 95415555
www.bosch-pt.com.au
www.bosch-pt.co.nz
Republic of South Africa
Customer service
Hotline: (011) 6519600
Gauteng – BSC Service Centre
35 Roper Street, New Centre
Johannesburg
Tel.: (011) 4939375
Bosch Power Tools