Rear I/O Ports; Dc-In - DFI CS103-C246 User Manual

X Rear I/O Ports
„ DC-In „ 4 x USB 3.1
The rear panel I/O ports consist of the following:
• 2 DP++ ports
• 1 DC-In, optionally internal vertical 4-pin connector
• 2 RJ45 LAN ports
• 4 USB 3.1ports, Gen2 for C246/Q370, Gen1 for H310
User's Manual | CS103
„ LAN 1 „ LAN 2
„ 2 x DP++

Rear I/O Ports

X
9~36V DC-In
„ DC In coaxial
Connect a coaxial DC power cord to the rear coaxial connector for DC supply. The vertical 4-pin
type is avaible upon request.
Important:
Using a voltage higher than the recommended range may result in failure in start-
ing and booting the system or causing irreversible damage to the system board.
A power adaptor/converter is necessary when the power source on site does not
comply with the power specifications of the board.
Chapter 2
HARDWARE INSTALLATION
4-pin vertical (optional)
DC In coaxial
17