Usb Ports; Graphics Display - DFI CS103-C246 User Manual

Rear I/O Ports
X

USB Ports

„ USB 2 (USB 3.1)
„ USB 1 (USB 3.1)
USB allows data exchange between your computer and a wide range of simultaneously acces-
sible external Plug and Play peripherals. The system board is equipped with multiple USB Type
A ports at the rear side — four USB 3.1 Gen1 (H310) or Gen2 (C246/Q370) ports. For the inter-
nal USB ports, please refer to the next section. Please refer to the next section for internal USB
connectors.
Wake-On-USB Keyboard/Mouse
The Wake-On-USB Keyboard/Mouse function allows you to use a USB keyboard or USB mouse
to wake up a system from the S3 (STR - Suspend To RAM) state.
User's Manual | CS103
„ USB 4 (USB 3.1)
„ USB 3 (USB 3.1)
Rear I/O Ports
X

Graphics Display

„ DP++ 1 „ DP++ 2
DisplayPort ++
The DisplayPort (DP) is a digital display interface used to connect a display device such as a
computer monitor. It is used to transmit audio and video simultaneously. The interface, which
is developed by VESA, delivers higher performance features than any other digital interface.
Chapter 2
HARDWARE INSTALLATION
18