W
iring diagram
[3] From Switch Unit to LED Circuit
Route Controller's lead wires (blue, gray) to LED circuit as described in Fig. D-4.
Fig. D-4
LED circuit
Connector
Route Lead wires
under the two tabs.
tabs viewed from
left side
Route Lead wires between
these ribs.
Switch unit
rib
rib
Put Connectors and the slack portion
of Lead wires in the space.
Note: Be careful not to put them on
LED circuit nor the ribs around
LED circuit.
tab
Light holder
Make sure that Lead wires
are tight in this portion.
P 15/15