Makita BFL060F Series Technical Information page 13

W
iring diagram
[1] From Terminal to Main Switch
Fig. D-2
Right side of Main switch
Fix the following Lead wires securely
with the Lead wire holders on Main switch:
1. Endbell's lead wire (black)
2. Controller's lead wire (white)
1
2
Lead wire holder
Route Lead wires
beside this rib.
rib
Put Connectors
between these ribs.
rib
Connector
Connector
Rear side of Main switch
Route the following Lead wires between
the two ribs on the rear of Main switch:
Endbell's lead wires (red, black) to Reverse switch
Controller's lead wires (blue, gray) to LED circuit
Controller's lead wires (purple, yellow) to Switch unit
Controller's lead wires (blue, yellow) to Lamp unit
rib
Main switch
Controller
Buzzer
circuit
Terminal
P 13/15