Toshiba Satellite Pro 4600 Series User Manual page 89

2 In the Control Panel window, double-click the Power Saver
icon.
3 In the Running on batteries area, click the Details button, then
select the System Power Mode tab.
4 Select Standby for the options you want.
When I press the power button
Set this option to Standby if you want the computer to go
into Standby mode when you press the power button.
When I close the lid
Set this option to Standby if you want the computer to go
into Standby mode when you close the display panel.
When the system standby time has passed
Set this option to Standby if you want to the computer to
automatically go into Standby mode when you haven't
used it for a specified amount of time. You can set the
System standby time on the Power Save Mode tab.
5 Click Override all Modes with settings here.
6 In the Set to range dialog box, do one of the following:
Click DC only if you want the settings to apply only
when you are using battery power.
Click All if you want the settings to apply whether you
are using battery power or outlet power.
7 Click OK.
8 Click OK again, then close the Control Panel.
NOTE: For more information about the Power Saver utility,
see Toshiba Power Saver utility on page
Learning the Basics
Powering down the computer
168.
89