Toshiba Hardware Setup - Toshiba Satellite Pro 4600 Series User Manual

166
Toshiba Utilities

Toshiba Hardware Setup

Toshiba Hardware Setup
Toshiba Hardware Setup is the Toshiba configuration
management tool available through Windows. To access it, open
the Start menu, point to Settings, Control Panel, then click
Toshiba Hardware Setup.
There are several tabs representing various dialog boxes. They are:
Boot Priority — Allows you to change the sequence in which
your computer searches the drives for the operating system.
Keyboard — Allows you to assign as well as disable various
key combinations.
USB — Allows you to enable or disable USB legacy
emulation.
Pointing Devices — Allows you to select types of devices.
Hardware Alarm — Allows you to control alarm volume and
whether an alarm sounds when the battery power is low or
when you close the display panel while the computer is on.
General — Allows you to view current BIOS, hard disk drive
and memory settings.
Device Config — Allows you to select device configurations.
Parallel/Printer — Allows you to select the printer port type.
Password — Allows you to set user passwords. If you do this,
you can use SecureSleep
the password to be entered before accessing Windows.
Display — Allows you to change various settings for the
built-in display.
PC Card — Allows you to change the controller mode
settings.
CPU — Allows you to enable or disable the processor serial
number, and to set the "CPU Frequency Mode" to either
TM
to protect your work by requiring