Display Problems - Toshiba Satellite Pro 4600 Series User Manual

Removing the AccuPoint II cap
2 After cleaning the cap, position it on the peg and press it into
place.
NOTE: The peg is square, so be careful to align the cap' s
hole with the peg.

Display problems

Here are some typical display problems and their solutions:
The display is blank.
Display Auto Off may have gone into effect. Press any key to
activate the screen.
You may have activated the instant password feature by pressing
and
Fn
type the password and press
Enter,
registered, simply press
you to continue working.
If you are using the built-in screen, make sure the display priority
is not set for an external monitor. To do this, press
simultaneously (once). If this does not correct the problem, press
and
Fn
previous setting.
simultaneously. If you have registered a password, press
F1
simultaneously again to return the display priority to its
F5
If Something Goes Wrong
Resolving a hardware conflict
Enter
. The screen reactivates and allows
Enter
. If no password is
and
Fn
195
F5