Toshiba Satellite Pro 4600 Series User Manual page 113

Installing additional memory (optional)
3 Using a standard Phillips no. 1 screwdriver, remove the two
screws that secure the expansion memory slot cover, then
remove the cover. Put the screws where you can retrieve them
later.
4 Gently press the latches on both sides of the memory module
to release the module from the connector.
The memory module pops partially out of the slot.
Pulling the latches away from the memory module
5 Carefully remove the module from the slot and place it in
antistatic packaging.
NOTE: Avoid touching the connectors on the memory
module or on the computer. Grease or dust on the
connectors can cause memory access problems.
6 Fit a new memory module if required, following steps 4
through 6 of
7 Replace the expansion memory slot cover and secure it with
the screws you removed earlier.
Installing a memory module on page
Expansion Options
113
110.