Inserting A Charged Battery - Toshiba Satellite Pro 4600 Series User Manual

104
Mobile Computing
Changing the main battery
7 Gently lift the battery module out of the battery compartment
and remove it from the computer.
Removing the battery
WARNING: If the battery is leaking or its case is cracked,
wear protective gloves. Discard the battery immediately,
following the advice in
page

Inserting a charged battery

1 Wipe the terminals of the charged battery with a clean cloth to
ensure a good connection.
2 Slide the battery lock to the unlocked position (toward the
front of the computer).
3 Without using force, place the battery module in the battery
compartment.
HINT: When properly seated, the battery cover is flush with
the bottom of the computer.
4 Using light pressure, slide the battery module toward the
contacts in the battery compartment and hold it in place.
105.
Disposing of used batteries safely on