Neo Vacuum Module Manual MODULE INSTALLATION The Neo Vacuum Module is installed into the back of the Neo Therapy System Cart. A ribbon cable is plugged into • Remove the four (4) screws where they attach to the the circuit board in the back of the Neo Head after the inside of the Cart.
Page 3
Neo Vacuum Module Manual MODULE INSTALLATION (CONTINUED) 4. Insert the Vacuum Module into the Cart as shown. 3. Remove the Back Panel from the Neo Head. • Remove any faceplates from both sides of the cart. • On each side of the cart, remove the screws that fasten the back panel to the chassis, as shown.
Page 4
Neo Vacuum Module Manual MODULE INSTALLATION (CONTINUED) • DO NOT permit foreign materials, liquids or cleaning agents to enter the unit, including, but not limited to, inflammables, water, and metallic objects from 6. Reattach the Back Panel on the Neo Head Unit. Secure entering the unit, to prevent unit damage, malfunction, electrical shock, fire, or the back panel to the chassis with the two (2) screws personal injury.
Page 5
Neo Vacuum Module Manual WARNING DANGER • In the event of all 300-Level or a 200-Level error message that cannot be • Handle, clean and dispose of components and accessories that resolved, immediately stop all use of the system, and contact the dealer or DJO have come in contact with bodily fluids according to National, Local for service.