German pool EFB-226 User Manual page 7

Operating Instructions
Remote Control
All functions can be operated by remote control
Swing
To start/stop swing
Sleep Mode
Change to softy wind
On/Off
To switch On/Off the fan
Operation
You can hear beep sound when you press the button on fan or remote control every time.
On/Off
Fan
To start fan operation press the display panel. Tap the panel to cycle from
fan speed 1 – 9. Hold down the display panel for 2 seconds and a buzz will
sound, release the panel and the fan will stop operation.
Remote Control
The fan also can be turned on/off by using the remote control.
On / Off
Timer
Press this button to set timer off from 1 to 8 hours. Timer funtion operates
Remote Control
in 1-8-0 circulation. 0 refes to timer off (with 2 beep souds).
Timer
• The other functions of the fan still can be used after the timer function is set.
• The machine will stop running when the set time is up. Please press the power button again if you
need to restart it.
• After the fan power is turned off, the timer setting will also be cancelled.
Sleep model
Please press this button on the remote control, LED display shows L, and
Remote Control
the wind turns to be soft. Press wind speed button + - to exit this mode.
Sleep Mode
Speed Increase /
Decrease
Total 9 speed Levels
Timer
Total 1-8h timer off
Strong Wind
Max. airflow speed
only can set by remote
control
P.12
Operating Instructions
Strong wind
Please press this button on the remote control, LED display shows H, and
Remote Control
the wind turns to be strong. Press wind speed button + - to exit this mode.
Strong Wind
Swing
Press the display for 1 second to start swing.
Fan
Press it again for 1 seconds and remove the hand after hearing one beep
sound, the swing stops.
Remote Control
Swing function also can be operated by the remote control.
Swing
When the remote control is not in use, put it on the remote control shelf
at the top. There is a magnet inside to hold the remote control.
Remote Control Shelf
Caution: It does not completely turn off the fan
power if you just turn off the power button on either the fan
or the remote control. If you do not use the fan for a long
time, unplug the plug.
P.13