Toshiba Qosmio G40 User Manual page 216

Problem
Character display
becomes garbled
during a
communication
You cannot receive an
incoming call
LAN
Problem
Cannot access LAN
Wake-up on LAN does
not work
Wireless LAN
If the following procedures do not restore LAN access, consult your LAN
administrator. For more information on wireless communication, refer to
Chapter 4,
Problem
Cannot access
Wireless LAN
Wake-up on Wireless
LAN does not work
User's Manual
Procedure
When transmitting data you should ensure that
the parity bit and stop bit settings correspond
with those of the remote computer - you should
check the flow control and communication
protocol settings within your communication
application.
Ensure that the communication application's
rings before auto answer feature is set correctly.
You are also able to use the ATS0 command -
please refer to Appendix D,
information.
If you are still unable to resolve the problem,
contact your reseller, dealer or service provider.
Procedure
Check for a firm cable connection between the
LAN jack and the LAN HUB.
Make sure the AC adaptor is connected. The
Wake-up on LAN function consumes power even
when the system is off.
If problems persist, consult your LAN
administrator.
Operating Basics.
Procedure
Make sure the computer's wireless
communication switch is set to on.
Make sure the AC adaptor is connected. The
Wake-up on Wireless LAN function consumes
power even when the system is off.
If problems persist, consult your LAN
administrator.
Troubleshooting
S-registers for further
10-22