6. Slide and hold the battery release latch (1) to disengage the battery
pack and then remove it from the computer (2).
Battery pack
To install a battery, follow the steps as detailed below:
7. Insert the battery pack as far as it will go into the computer (1).
8. Ensure that the battery pack is securely in place and the battery safety
lock (2) is in its (
Battery pack
9. Turn your computer over.
User's Manual
Figure 6-2 Releasing the battery pack (2)
) position.
Figure 6-3 Securing the battery pack
Power
Battery release
latch
Battery safety lock
6-12