Infrared receiver window
If you are using a USB mouse, you should also refer to both the USB
device section in this chapter, and the documentation supplied with your
mouse.
Problem
Infrared devices do
not work as expected
Pointing device
If you are using a USB mouse, you should also refer to both the
device
mouse.
Touch Pad
Problem
On-screen pointer
does not respond to
pointing device
operation
Double-tapping does
not work
User's Manual
Procedure
Make sure there is no obstruction blocking
communication between the computer and the
target device.
If you are still unable to resolve the problem,
contact your reseller, dealer or service provider.
section in this chapter, and the documentation supplied with your
Procedure
In this instance the system might be busy - Try
moving the mouse again after waiting a short
while.
In this instance, you should initially try changing
the double-click speed setting within the Mouse
Control utility.
1. To access this utility, click Start -> Control
2. Within the Mouse Properties window, click
3. Set the double-click speed as required and
Panel -> Hardware and Sound -> Mouse
icon.
the Buttons tab.
click OK.
Troubleshooting
USB
10-15