S-Video-In - Toshiba Qosmio G40 User Manual

Settings for display video on HDMI
To view video on the HDMI device, be sure to configure the following
settings otherwise you may find that nothing is displayed.
■
Be sure to use the FN + F5 HotKey to select the display device before
starting to play video. Do not change the display device while playing
video.
■
Do not change the display device under the following conditions.
■
■
VIDEO-IN
Refer to chapter 8,
connect and use the computer with the VIDEO-IN cable.

S-Video-in

This port allows you to import video data from analog video cameras or
video decks by connecting your computer to this type of device. Imported
video can be edited or written to a DVD disc.
1. Insert one end of the S-Video-in cable into the S-Video-in port of your
computer.
2. Insert the other end of the S-Video-in cable into the output port of the
analog device you wish to connect. To hear sounds, use a video cable
to connect the sound terminals of the audio device and your computer
(red: sound, right channel, white: sound, left channel).
After connecting an analog video camera or a video deck to your computer,
run Ulead DVD MovieFactory for TOSHIBA. Ulead DVD MovieFactory for
TOSHIBA is started by selecting Start -> All Programs -> Ulead DVD
MovieFactory for TOSHIBA.
User's Manual
While data is being read or written.
While communication is being carried out.
Connecting the VIDEO-IN port
Figure 9-17 Connecting the S-Video-in port
Optional Devices
for details on how to
S-Video-in port
9-21