Hydraulic Lift Equipment - New Holland TD60D Repair Manual

6
SECTION 35 − HYDRAULIC SYSTEM − CHAPTER 1

HYDRAULIC LIFT EQUIPMENT

Warning − The operations described in this section
cannot be carried out without the ESSENTIAL tools
marked below with (X).
However, to ensure greater safety and obtain the
best results while saving time and effort, we recom-
mend that these essential tools are used in conjunc-
tion with the specific tools listed below as well as cer-
tain tools which are to be made following the
construction drawings given in this manual.
380000215 Hand pump for valve calibration.
380000224 Lifting hook.
380000238 Hook adapter 380000224.
604.54.471.00 − 11 − 2004
TOOLS
X 380000225 Ring for fitting piston with lift seals.
X 380000274 Union for checking control valve
seal.
X 380000262 Punch for fitting lift arm shaft seals.
X 380000261 Punch for fitting needle bearings on
control valve block control lever bu-
shing.
X 380000260 Punch for fitting needle bearings to
upper/lower draft control levers and
to draft control link rod.
X 380000230 Wrench for cylinder safety valve set-
ting ring nut.
X 380000218 Union for cylinder safety valve cali-
bration.
X 380000267 Wrench for maximum lift screw lock-
nut.
X 380000263 Draft control setting tool.
X 380000264 Position control setting tool.